403 PARTIAL GROUP COMPLETION

This command is sent by the site to which the request was forwarded upon completion of the group. The telescope controller puts the command into the ATIS output file of the telescope which took the data, and sends the header to the requester along with the partial output file.

It is the telescope controller's responsibility to keep track of the total telescope time used to complete the group and maintain a log of remote time usage by site. If this total time exceeds pre-agreed allocation this becomes a reason for group rejection.

IDENTIFIER: 403

INFORMATION

Name Type Input Output
1 From IP address or DNS Entry String Required Required
2 From Telescope Number Integer Required Required
3 To IP address or DNS Entry String Required Required
4 Group Number Integer Required Required
5 User Number Integer Required Required
6 To Telescope Number Integer Required Required
7 Total Observing Time (Seconds) Integer Required Required
8 Network Data File which

Requested Observation

 String Required Required
9 Network Data File which

Contains the Observation Data

 String Required Required
10 Image or Data File Name String Required Required

Example
403
24.1.225.36 2 gnat..com 3 355 66 N01151143AA N0251143AC P51143AZ

Where:

From IP address or DNS Entry: is the numerical IP address or registered site name for the telescope which received the observing request.
From Telescope number
To IP address or DNS Entry: is the numerical IP address or registered site name for the telescope which sent the observing request.
Group Number: The group number of the passed group.
User Number: The user number of the passed group.
To Telescope number:
Network Data File: which requested the observation - file name
Networked Data File: which contains the observation data - file name
Image or Data File name: - file name

[Previous] 402 SERIES [Up] 400 Series [Next] 500 SERIES